Pumps

Putting together packaged equipment solutions is our specialty.
We design, and assemble complete skid mounted pump units including pump, motor, guards, dampeners, etc. designed to get YOUR job done .We can work with you to help design and specify the equipment you need for the job.

Reciprocating and centrifugal pump sizing and selection. complete pumping system engineering, design, fabrication, unitization, installation supervision and start-up services.

Bayliss Energy Represents EWECO - Mud pumps manufacturer

EWECO manufacture:

Single-acting triplex piston and plunger pumps for true continuous-duty up to 2200 hp
Single-acting all roller bearing quintuplex piston and plunger mud pumps up to 2200 hp with all fluid end interchangeability options
Quick-detach/reattach, easy-to-move packages
Allison transmission applications up to 2200 hp

Manufactured in our own machine shop, EWECO pumps are designed to meet tough, exacting and demanding standards. Every EWECO pump is fabricated with a high-strength, heat-treated alloy steel power frame, often allowing easy modification or customizing of pump designs to meet your custom applications.
EWECO is large enough to handle your job and small enough to be personal and flexible. Using proven pump technology, EWECO responds quickly to meet your needs. Over 130 years of total proven staff experience.

Up to 20,000 psi continuous-duty fluid ends
Interchangeable fluid end styles with all other types, including linear bore
All EWECO pumps have maximum performance per pound.

All EWECO pumps offer:

Anti-friction roller bearings throughout without compromise
Pinions, gears, crankshafts and fluid end modules made from high-strength, heat-treated, forged alloy steel
Versatility of engineering and design to accommodate: Various internal gear ratios, all sizes, all AGMA 424.01
Balanced forged alloy steel eccentric crankshafts, machined between centers on all axes
All applications and packaging options
Quick-detach/reattach, easy-to-move packages
Allison transmission applications up to 2200 hp

PUMPING UNITS
EQ-1600-11
EQ-1200EQ-1000
EQ-750
EQ-600
E-2200-15
E-2200-14
E-1700-14
E-1700-12
E-1300
E-1000
E-800
EH-2200
EH-1600
EH-1000
EH-750
E-447
E-300

Applications where EWECO Pumps are in use around the world are:

Oil Well Drilling Mud Pumps
Well Servicing/Workover
Water Flood
Cutting Re-injection
Saltwater Disposal
Cementing
Crude Oil Transfer
Hydraulic Press Water Supply
Horizontal Directional Drilling (HDD)
Water Blast & Jetting Service
Pressure Maintenance
Metering Applications
Coil Tubing Drilling

Bayliss Energy Represents STAUFF PUMPS

Stauff Pumps delivers a complete range of positive displacement (PD) pump products from the world's leading manufacturers - including Bredel, Watson Marlow, Netszch, FMI and Putzmeister.

Founded in 1976 with the motto "Quality and Service First", the company has grown from the Head Office in Wollongong, NSW, to include branch offices in Sydney, Melbourne, Brisbane, and Adelaide. The Company has achieved the status of a Quality Endorsed Company to the ISO 9002 standard.
While large stocks are held in the head office and branch warehouses, this is supported by a distributor/reseller chain that makes the product range available throughout Australia. An Export section looks after the needs of the Asian and Pacific countries.
There are two active divisions within the company.
The Hydraulics Division markets products generally to the engineering and hydraulics industries.

The Pump Division markets a specialised range of pumps to meet the needs of all relevant industries.

PUMPING SOLUTIONS FOR YOUR BUSINESS

Stauff Pumps delivers a complete range of positive displacement (PD) pump products from the world's leading manufacturers – including Netzsch & Watson Marlow Bredel.
When these products are combined with our knowledge and expertise of the pumping industry, the result is a precise and effective service that ensures the right solution for your pumping requirements.
While the product range is extensive, our international connections permit access to additional, sometimes obscure, products.
The technical capabilities within the company are the foundation for good product support.

Artificial Lift - Pump of Choice
The Progressing Cavity Pump (PCP) is the artificial lift pump of choice. Whether it be for higher efficiencies (lower horse power requirements), efficient handling of high viscosity production fluids, better handling of sand or other abrasive contaminants, the PCP Pump will maximize production volume, while minimizing costs.

Why a PCP Pump:
Power savings, because of higher pump efficiencies. The PCP pump system will have a typical efficiency of 70-98%. Comparable beam pumping efficiencies are 50-60%, and electrical submersible pumping efficiencies are 40-50%.
Efficient handling of a wide range of fluids. The PCP Pump will handle heavy viscous oil, light waxy oils, high sand cut oil and high water cut oil with no detrimental effect upon pumping efficiency.

No valves to gas lock, foul up or gum up.
In addition to lower power consumption, the operator will achieve longer pump life and experience fewer rod and tubing problems, because of relatively slow operating speed of the pump.

Application Information:
The PCP Pump should be run at an optimum speed to maximize efficiency, while minimizing wear on the pump, sucker rod and tubing string. It is better to oversize the PCP pump and allow for an increase on the production at a later date. As such, rotor and rod string speed should be 100-400 RPM.

Each PCP Pump has a maximum differential pressure base upon the number of seal lines between the rotor and stator. This maximum differential pressure is determined by the rated lift for a specific pump.

The PCP Pump is very resistant to damage caused by abrasive sand in the production fluid. The natural pumping action of the PCP Pump will result in the production fluid with sand to be displaced by the rotor, though, sand particles may become caught between the rotor and stator. However, this sand will be pressed into the soft resilient elastomer until the next cavity of fluid passes by to carry the sand on through the pump.

Advantages PCP and NSPCP
Conveying of oil possible with:
High viscosity
high solids contents
High gas contents
Multiphase
Few wear parts
Compact construction
Special sealing

NETZSCH Oilfield Products GmbH

WATSON MARLOW BREDEL HOSE PUMPS

Bredel hose pumps - from the people who invented hose pumping
Bredel engineering created an entirely new type of pump - the high-pressure hose pump. Its patented technology achieved what was believed to be impossible: the unbeatable simplicity, reliability and low-maintenance needs of peristaltic pumping brought to high-flow, high-pressure duties.
Today, 75,000 Bredel pumps are at work around the world at flow rates up to 80 cubic metres/hour (350 US gpm) and pressures up to 16 bar. Hose pumps are the future, and they work. Tens of thousands of pump users know there isn't a more rugged and reliable solution to pumping problems than a Bredel.